Before you use Independent mode of Nano S, a Micro SD card has to be installed in the camera.

• Photo:
• 1. Press on the power button of the camera to turn it on.
• 2. Press on the power button again, when the green indicator blinks once, it means a photo is captured successfully.
• 3. Connect Nano S to iPhone to review.

• Video:
• 1. Press on the power button of the camera to turn it on.
• 2. Press on the power button twice, when the green indicator keeps blinking, a video is being recorded.
• 3.Press on the power button again to stop recording.
• 4. Connect Nano S to iPhone to review.

• • Timed photo:
  • 1. Connect Nano S to iPhone -> open Nano S App.
  • 2. Tap Setting -> Tap Triple-tap Setting.
  • 3. Turn on Timed photo -> set Timer.
  • 4. Unplug the camera from iPhone -> Press the power button to turn it on.
  • 5. Press the power button three times, and the blue indicator will keep blinking. If the timer is set to 3 seconds, the blue indicator light will blink for three times.
  • 6. When the indicator turns green, a timed-photo captured successful.
  • 7. Connect Nano S to iPhone to review.
  • 8. Please keep the camera still and avoid shaking or moving while you are taking a timed photo.

• • Time-lapse video:
  • 1. Connect Nano S to iPhone -> open Nano S App.
  • 2. Tap Setting -> Tap Triple-tap Setting.
  • 3. Open Time-lapse and set the 'Total recording time' and 'Frame Interval'.
  • 4. After setting, unplug the camera from iPhone -> press on the power button to turn it on.
  • 5. Press on the power button three times, and the indicator will keep blinking blue-green-blue-green.
  • 6. Wait until the indicator stops flashing which means a time-lapse video has finished, or you can press the power button again to stop recording.
  • 7. Connect Nano S to iPhone to review.
  • 8. Please keep the camera still and avoid shaking or moving while you are taking a time-lapse video.